|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Non-isolated AC/DC converter BP5055-12 Absolute Maximum Ratings Parameter Symbol Input voltage Vi Operating temperature range Topr Storage temperature range Tstg Case temperature Output current Tcmax Iomax 1 Iomax 2 Limits -600 -20 to 80 -25 to 105 105 250 130 Unit V C C C mA mA Conditions 21.5MAX. Dimensions(Unit : mm) 28.2MAX. 9.9MAX. Ambient temperature + the module self-heating Tcmax PEAK value of current (Vi= to -420V) PEAK value of current (Vi=-420 to-600V) 4.0 +1.0 3.25MAX. 0.5+0.1 1.3 +0.2 P=5.08+ 0.2 0.25+0.05 5.55MAX. 4.35MAX. 2.54x9=22.86TYP. Electrical Characteristics Unless otherwise specified Ta=25C, Vi=-311V, IO=250mA Derating Curve Unit V V mA mA V V Vp-p % Conditions Output Current Io(mA) 300 250 200 150 100 50 0 -20-10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta( C) Vi=-420V to -600V Vi=-240V to -420V Parameter Symbol Min. -240 Input voltage range -12.0 Output voltage Output current1 lo1 Output current2 lo2 Line regulation Load regulation Output ripple voltage Conversion efficiency 70 Typ. -311 -12.7 0.07 0.05 0.08 77 Max. -600 -13.4 250 130 0.25 0.20 0.20 Derating Curve Vi=-240V to -420V Vi=-420V to -600V Vi=-240V to -600V lo=130mA lo=0 to 250mA Conversion Efficiency 100 90 80 70 60 50 40 30 20 10 0 0 Conversion Efficiency (Ta=25 C, Vi=-311V) Conversion Efficiency (%) Application circuit BP5055-12 BP5055-12 Pin No. 1 2 3 4 5 6 7 8 9 10 Function Input terminal : Vi(-311VDC) Skip Skip COMMON Skip Power inductor terminal Skip Power inductor terminal Skip Output terminal : Vo(-12.7VDC) 50 100 150 200 Output Current Io(mA) 250 1 D2 R1 C1 C2 C4 FUSE 4 6 8 10 Load Regulation Line Regulation (Ta=25 C, Io=130mA) -13.5 -13.3 -13.1 -12.9 -12.7 -12.5 -12.3 -12.1 -11.9 -11.7 -11.5 -200 -250 -300 -350 -400 -450 -500 -550 -600 -650 Input Voltage Vi(V) Output Voltage -Vo(V) Vi ~ ZNR + + L1 D1 C3 A + V Vo Be sure to use fuse for safety. For actual usage, Please kindly evaluate and confirm our part mounted in your product, Especially, Please make sure to confirm the load current does not exceed Max. rated current by using the current probe. External components setting FUSE: fuse C1, C2: Input capacitor C3: Output capacitor Please make sure to use quick acting fuse (1A) above 450V, 22 to 100F Ripple current 0.7Arms above above 30V, 220 to 1000F, Low impedance ESR:0.18 Max. Ripple current 0.65Arms above Impedance of capacitor effects the output ripple voltage. Surface Temperature Rising 40 35 30 25 20 15 10 5 0 0 Surface Temperature Rising (Ta=25 C, Vi=-311V) 50 100 150 200 Output Current Io(mA) 250 C4: For noise terminal voltage Above 600V, 0.1 to 0.22F reduction capacitor Film capacitor or Ceramic capacitor Reduce the noise terminal voltage. The constant value should be evaluated in the product. L1: Power inductor Inductance:1.0mH, Rating current: above 0.74A Choose components that do not easily get magnetically saturated in high temperature. Recommended part : C13-FR 1.0mH (MITSUMI) Above 1000V, current: above 1.0A Fast recovery diode Please note that both the switching and efficiency characteristics of the module are affected by this diode. Recommended products: UF4007 (VISHAY) Use a rectifying diode with the peak reverse voltage of 1kV or higher, the average rectification current of 1A or larger and the peak surge current of 20A or larger. When using an input capacitor of a large capacity, choose a component that endures the inrush current on power-up. This product is compatible with full-wave rectification. D1: Flywheel diode D2: Rectifier diode R1: For noise terminal voltage 10 to 22, 1W Reduce the noise terminal voltage. reduction capacitor The constant value should be evaluated in the product. ZNR: Varistor Varistor must be used. It protects this part from lightning surge and static electricity. Marking Side DC Refer to derating curve Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of BP5055-12 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |